34
SBCEFCSW/SBFCM: HMM and Troubleshooting Guide
state [state]
Specifies the administrative state for the specified port. Use one of the following port state
values:
Online
Places the port online.
Offline
Places the port offline.
Diagnostics
Prepares the port for testing.
Down
Disables the port.
Set Setup command
Changes SNMP and blade server configuration settings. The switch maintains one SNMP
configuration and one configuration.
Authority
Admin
Syntax
set setup
snmp
system
Keywords
snmp
Prompts you, line-by-line, to change SNMP configuration settings. Table 11 describes the
SNMP fields. For each parameter, enter a new value or press the Enter key to accept the current
value shown in brackets.
Table 11. SNMP configuration settings
Entry
Description
Contact
Specifies the name of the person to be contacted to respond to trap events.
The default is Undefined.
Location
Specifies the name of the switch location. The default is Undefined.
Trap [1-5] Address
Specifies the IP address to which SNMP traps are sent.
Trap [1-5] Port
Specifies the port for which SNMP traps are sent.
Trap [1-5] Severity
Specifies the severity level to use when monitoring trap events. The default is
Warning.
Trap [1-5] Enabled
Specifies whether traps (event information) are enabled or disabled (default).
ReadCommunity
Read Community Authentication. A write-only field; the value on the switch
and the SNMP management server must be the same.
