Intel® Server Switch Module SBCEFCSW
109
Port Statistics Data window
The Port Statistics Data window displays statistics about port performance. To open the Port
Statistics Data window, select one or more ports in the Faceplate window and click the Port Stats
tab in the data pane of the Faceplate window. Table 28 describes the Port Statistics Data window
entries. See Table 37 on page 127 for information about port numbering and mapping.
The Statistics menu is available on the Port Statistics Data window. Click the down arrow to open
the Statistics menu and then use one of the following methods to view the detailed port information:
•
Click Absolute to view the total count of statistics since the last switch module reset.
•
Click Rate to view the number of statistics counted per second over the polling period.
•
Click Baseline to view the total count of statistics since the last time the baseline was set.
When viewing baseline statistics, click Clear Baseline to set the current baseline.
Table 28. Port Statistics Data window entries
Entry
Description
Start time
The beginning of the period of time for which the statistics apply. The start time
for the Absolute view is not applicable. The start time for the Rate view is the
beginning of the polling interval. The start time for the Baseline view is the last
time the baseline was set.
End time
The last time the statistics were updated on the display.
Total time
Total time period from start time to end time.
Login count
Number of logins that have occurred on the switch module.
Logout count
Number of logouts that have occurred on the switch module.
AI init count
Number of times the port entered the initialization state.
Invalid destination
address
Number of address identifiers (S_ID, D_ID) found to be in error.
Total LIP received
Number of loop initialization primitive frames received.
LIP F7F7 count
A loop initialization primitive frame used to acquire an Arbitrated Loop Physical
Address (AL_PA).
LIP F8F7 count
Currently not used.
LIP F7AIPs count
This LIP is used to reinitialize the loop. An L_Port, identified by AL_PS, might
have noticed a performance degradation and is trying to restore the loop.
LIP F8AIPs Count
This LIP denotes a loop failure detected by the L_Port identified by AL_PS.
LIP AIPdAIPs Count
Number of F7, AL_PS LIPs, or AL_PD (vendor specific) resets, performed.
Class 2 In Frames
Number of class 2 frames received by this port.
Class 2 Out Frames
Number of class 2 frames transmitted by this port.
Class 2 Words In
Number of class 2 words received by this port.
Class 2 Words Out
Number of class 2 words transmitted by this port.
Class 3 In Frames
Number of class 3 frames received by this port.
Class 3 Out Frames
Number of class 3 frames transmitted by this port.
Class 3 Words In
Number of class 3 words received by this port.
