Intel SBFCM Hardware Maintenance Manual Download Page 13

Page: 13 / 174

Safety and regulatory information

xiii

RRL Korea:

English translation of the notice above: If this device is certified by MIC-RRL (Korea EMC

requirement), the following user’s information shall be put on the conspicuous location of the front
page of user’s manual.

Device

User’s Information

Class A device

This device complies with RRL EMC and is operated
in commercial environment so that distributors or
users pay attention to this point.

If the product is sold or purchased improperly, please
exchange this product to what can be used at home.

Class B device

This device complies with RRL EMC and is operated
in a residential area so that it can be used at all other
location as well as residential area.

Remarks: Class A device - operated in a commercial area. Class B device - operated in a residential area.

Summary of Contents for SBFCM















































































































































































Search results

Summary of Contents for SBFCM

Reviews:

Related manuals for SBFCM

Brands by name

Popular brands

Intel SBFCM, Hardware Maintenance Manual

Search results

Summary of Contents for SBFCM

Reviews:

Related manuals for SBFCM

Brands by name

Popular brands