Fibre Channel Expansion Card SBFCM
139
CAUTION:
Hazardous energy is present when the blade is connected to the power source. Always
replace the blade cover before installing the blade.
18.
Ensure that the release levers on the blade server are in the open position (perpendicular to the
blade server).
19.
Slide the blade server into the bay until it stops. The spring-loaded doors that are further back in
the bay and cover the bay opening move out of the way as you insert the blade server into the
SBCE unit.
20.
Push the release levers on the front of the blade server to close them.
21.
Turn on the blade server. Press the keyboard/mouse/video select button.
✏
NOTE
The blade server control panel door is shown in the closed (normal) position in the
illustration.
22.
If the information displayed on the monitor screen is similar to the following text, update the
BIOS code if necessary and install the expansion card device drivers. If the information
displayed on the monitor screen is not similar to this text and you have checked the expansion
card configuration, go to “General Checkout” on page 159
QLogic Corporation
QLA2312 PCI Fibre Channel ROM BIOS Version X.XX
Copyright (C) QLogic Corporation 1993-2002 All Rights Reserved.
www.qlogic.com
Press <Ctrl+Q> for Fast!UTIL
BIOS for Adapter 0 is disabled
ROM BIOS not installed
