Intel SBFCM, Hardware Maintenance Manual

Page: 39 / 174

Intel® Server Switch Module SBCEFCSW
25
to accept the current value shown in brackets. Type
q
to cancel the configuration for one port, or
qq
to cancel the configuration for all ports. Table 7 on page 25 describes the port parameters.
✏
NOTE
For external ports (0,15), all port parameters apply. For internal ports, only the port state
setting is configurable. For information about port numbering and mapping, see Table 37
on page 127
ports [port number]
Initiates an editing session in which to change configuration parameters for all ports based on
the configuration for the port given by [port_number]. If you omit [port_number], port 0 is used.
For each parameter, enter a new value or press the Enter key to accept the current value shown in
brackets. Type
q
to cancel the configuration. Table 7 describes the port parameters. For external
ports (0,15), all parameters apply. For internal ports (1 through 14) only AdminState applies.
Table 7. Set Config port parameters
Parameter Description
AdminState Port administrative state: online, offline, diagnostics,
or down.
LinkSpeed 1 Gbps or 2 Gbps
PortType Type of port
TLPortMode Initiates the configuration of external ports attributes.
Indicates whether using initiator or target devices on
the loop. If you specify [port_number], the display will
present attributes for that port only; otherwise, all
attributes for all ports will be available for
configuration.
ISLSecurity E_Port security. Determines which switches a port
will establish a link with.
• Any - Will link with any switch.
• Ours - Will link only to another Fibre Channel
switch module.
• None - The port will not establish an ISL link.
SymbolicPortName Descriptive name
ALFairness Default is switch that has priority
ARB_FF Use ARB_FF instead of idles on loop FCAL option
InteropCredit Number of buffer-to-buffer credits per port. 0 means
the default (12) is unchanged.
ExtCredit Extended credit port
FANEnable Fabric Address Notification. If enabled, notifies
logged-in NL_Ports of the FL_Port address, port
name, and node name.
LCFEnable Link control frame preference, R_CTL = 0xC
MFSEnable Multi-frame sequence bundling
MFS_TOV MFS limit for camp on