Thermal Specifications
52
Thermal/Mechanical Specifications and Design Guidelines
6.1.6
Thermal Metrology
The maximum TTV case temperatures (T
CASE-MAX
) can be derived from the data in the
appropriate TTV thermal profile earlier in this chapter. The TTV T
CASE
is measured at the
geometric top center of the TTV integrated heat spreader (IHS).
illustrates
the location where T
CASE
temperature measurements should be made. See
for drawing showing the thermocouple attach to the TTV package.
Note:
The following supplier can machine the groove and attach a thermocouple to the IHS.
The supplier is listed below as a convenience to Intel’s general customers and the list
may be subject to change without notice. THERM-X OF CALIFORNIA Inc, 3200
Investment Blvd, Hayward, Ca 94545. Ernesto B Va1-510-441-7566 Ext. 242
[email protected]. The vendor part number is XTMS1565.
Figure 6-5. TTV Case Temperature (T
CASE
) Measurement Location
37.5
3
7
.5
Measure T
CASE
at
the geometric
center of the
package
Summary of Contents for 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - THERMAL MECHANICAL S AND DESIGN GUIDELINES 01-2011
