INSYS TwinLock compact, Assembly Instructions Manual

Page: 28 / 45

TwinLock
Assembly Instructions
28 Version 1.12
Terminal Description
1
Additional sabotage contact A (input)
2 Additional sabotage contact B (input)
3 Bolt system contact 1 A (input), only distribution function !
4 Bolt system contact 1 B (input), only distribution function !
5 Bolt system contact 2 A (input), only distribution function !
6 Bolt system contact 2 B (input), only distribution function !
7 Door contact 1 A (input), only distribution function !
8 Door contact 1 B (input), only distribution function !
9 BAS connection door contact (output), only distribution function !
10
BAS connection door contact (output), only distribution function !
11
BAS connection bolt system contact (output), only distribution function !
12 BAS connection bolt system contact (output), only distribution function !
13 Antitamper loop (output), BAS connection
14 Antitamper loop (output), BAS connection
15 ARMED (output), BAS connection
16 UNARMED (output), BAS connection
17 SU-COM (output) (armed/unarmed), BAS connection
18 Door contact 2 A (input), only distribution function !
19 Door contact 2 B (input), only distribution function !
20 RS232 - GND
21 RS232 - RX (output)
22 RS232 - TX (input)
23 STATE – COM (output)
24 STATE
– Closed (output)
25 STATE – open (output)
26 BAS READY (Input), BAS connection
27 GND
28 BLOCK UNARMING (Input), EMA connection
29 GND
30 TIMEOUT (input), interruption of the timer programs during opening
31 GND
32 CENTRAL (input) bolt system contact
33 GND
34 ALARM – no alarm (output), BAS connection
35 ALARM – alarm (output), BAS connection
36 ALARM – COM (output), BAS connection
37 ACKNOWLEDGEMENT (Input), EMA connection
38 GND
39 RELEASE (Input), EMA connection
40
GND
41 Supply voltage 12 VDC
42 GND
BUS A Connection of the system bus A (TwinLock system)
BUS B Connection of the system bus B (TwinLock system)
J1 Jumper for the configuration of the input BAS READY
J2 Jumper for the configuration of the input RELEASE
J3 Jumper for the configuration of the input BLOCK UNARMING
J4 Jumper for the configuration of the input ACKNOWLEDGEMENT
LED Power LED (green) blinks when the alarm system is active.
REL1 Relay: State
REL2 Relay: Armed/disarmed
REL3 Relay: Alarm
J5 (JF) Jumper: Remote release