Inova Solutions OnTime 4-Digit Digital Clocks, Installation And User Manual

Page: 13 / 42

3. Mount the junction box (part 1 in Figure 4) to the stud or post.
Figure 4: Analog Clock Double Mount Assembly
4. Route the cable to the junction box as desired.
5. Route the cables though the couplings of the junction box adapter plate
(part 2 in Figure 4).
6. Attach the adapter plate to the junction box using the 4 screws (part 3 in
Figure 4) provided.
7. Route the cable through the holes in the housing and then through the
washers (part 5 in Figure 4) and retaining nuts (part 6 in Figure 4). Secure
the housing with the retaining nuts and tighten.
8. Plug the cables into the jack located on the back of the clocks.
9. Attach the clocks to the housing using screws (part 7 in Figure 4 and
Figure 5).