Figure 12: Template for 6-Digit Clocks
3.
Using the template provided, locate the holes for the customer supplied
hardware.
4.
Drill two 5/16” holes.
5.
Once holes for the bolts have been made, install #6 molly anchors in the
holes, tighten until they expand, and then withdraw the screws.
6.
Cut out the shaded area indicated on the template.
7.
Install the data cable in the rear of the clock as shown in Figure 13. The
clock is now ready for installation.
Summary of Contents for OnTime 4-Digit Digital Clocks
