Inova Solutions OnTime 4-Digit Digital Clocks, Installation And User Manual

Page: 35 / 42

The service light is on. The service light is located at the bottom right of the Digital Clock
face.
When the light is on steady, it usually means that the time server can
no longer be reached.
Note: that this can also happen if the DHCP
served IP Address cannot be renewed.
Reboot the clock to verify that it properly receives a DHCP address.
Verify that time appears on the display.
Determine the IP Address
of a Clock Lift up gently on the unit to free the keyholes at the rear of the clock from the
mounting hardware.
Disconnect the network cable and count to five.
Replace the network cable and watch the Digital Clock face or the Analog
Clock rear display for the IP Address.
Record the IP Address and location.
Digital Clock Face or
Analog Clock rear display
showing „----„ The Time Server is either not properly specified or is unreachable.
Table 9: Troubleshooting the OnTime Clock