Inova Solutions OnTime 4-Digit Digital Clocks, Installation And User Manual

Page: 18 / 42

The flush mounting feature of the OnTime clock provides an attractive,
streamlined mounting that blends with all room decors. This simple system
hides the clock body, while still giving full viewing access to the time face with
no visible wiring.
The following is the recommended procedure for flush mounting.
1. Ensure that the location that is chosen for mounting is pre-wired with a
data network feed.
2. Cut an appropriately-sized opening into the wall. Refer to Table 2 for
appropriate dimensions for the opening.
Model Vertical Dimension Horizontal Dimension
4-Digit 12
3
/
8
” or 31.4 cm
6 ½” or 16.5 cm
6-Digit
17
7
/
8
” or 45.4 cm
Table 2: Dimensions for Mounting Digital Clock
Clearance within the wall should be at least 2 ½” (6.4 cm) deep to allow
for the clock body.
When cutting the opening please use the template provided. This will help
ensure that the opening is square as well as the proper size and in the
correct location. For the template, refer to Figure 11 and Figure 12.
Figure 11: Cut-out Template for 4-Digit Clocks