Inova Solutions OnTime 4-Digit Digital Clocks, Installation And User Manual

Page: 14 / 42

Figure 5: Analog Clock Wall Mount
10. For ceiling mount applications, the orientation of the clock can be
corrected by removing the screws that secure the clock to the housing and
rotating the clock 90 degrees to the desired position.
The following is a recommended procedure for surface mounting the digital
clock. No mounting kit is required.
1. Determine the clock mounting location.
2. Mark two points 10” (25.4 cm) apart which are level and centered on the
data cable outlet.
Note that both models are mounted with a ten inch distance between screw hole
centers; however, the best location for the wall jack varies.
Refer to the
templates in Figure 6 and Figure 7 to ensure that you line the wall jack up
with the recess in the back of the unit.
7