Inova Solutions OnTime 4-Digit Digital Clocks, Installation And User Manual

Page: 23 / 42

The second method is to
assign an IP address via
DHCP and set individual
configuration options via a
telnet session. Clocks are factory set with DHCP enabled. The
options may be set using telnet commands.
Section 7
The third method is to
assign an IP address and
individual configuration
options via a telnet session. Use telnet commands to assign both a static IP
address and the appropriate configuration options.
Note: that if you have more than one OnTime clock,
you will need to configure each one individually
with this option. Section 7
Table 3: Clock Configuration Methods