p40
Ver. 3.003 (24/4/03)
CONCEPT IQ. PLUS Programmer’s Manual.
PULSE COUNTING
1) Enable Pulse Count operation for any Zone Inputs that are to be used as “Pulse Count Zones”.
Enable Option 4 - “Pulse Count” in the Zone Options.
NEXT 651 (Zone 1) to 666 (Zone 16)
2) Program the Pulse Count Value (0 to 15. Factory Default = 2).
NEXT 901
3) Program the Pulse Time (0 to 255 Seconds. Factory Default = 60) .
NEXT 902
4) If an Alarm on any Pulse Count Zone is to increment the Count on all Pulse Count Zones;
Enable Option 4 - “Pulse Count Handover” in “General Options 3”.
NEXT 892
SIREN OUTPUT TO OPERATE AS AN AUXILIARY
1) If the Siren (SPK) Output (Auxiliary 0) is required to operate as a normal Open Collector Auxiliary Output;
Enable Option 6 - “Siren Output operates as Auxiliary” in “General Options 3”.
NEXT 892
NOTE: IF ENABLED, A SIREN SPEAKER MUST NOT BE CONNECTED.
2) Program operation as a normal Auxiliary Output.
a) Select the Auxiliary Event Type. See Section 10 -”Tables” page 69 and 70 for details of Auxiliary Event Types.
NEXT 800 (Aux 0)
b) Program the Auxiliary Timer if required.
NEXT 830 (Aux 0)
c) Select the “Auxiliary Action”. See Section 10 -”Tables” page 71 for details of Auxiliary Actions.
NEXT 860 (Aux 0)
SIX DIGIT PIN CODES
1) If all PIN Codes in the system are required to be 6 digits in length;
Enable Option 1 - “6 Digit PIN Codes” in “General Options 3”.
NEXT 892
2) Program the User PIN Codes to be 6 digits in length.
NEXT 403 to 447
