Ver. 3.003
p15
CONCEPT IQ. PLUS Programmer’s Manual.
NEXT 23
Activate Walk Test.
Puts the system into Walk Test Mode. Any Zone activation causes Siren squawk and Zone Lamp to flash. Press <CLR> to exit.
The system will automatically exit from Walk Test if the “Walk Test Time” (Address 912) expires.
Walk Test only monitors for the Seal and Alarm (Un-seal) conditions. No indication of Zone Input Tamper state is provided.
NEXT 24
Auxiliary Control and Test.
Auxiliary number followed by
will toggle the Auxiliary Output On and Off.
0
= Siren Speaker output.
3
= Aux 2 (Gen purpose Aux on Controller)
1
= Aux 1 (Strobe output)
4 - 10 = Aux 4 to 10. (Gen purpose Auxiliaries on Expansion card)
NEXT 25
Trigger Test Report.
Triggers a Test Report to the Central Monitoring Station or the nominated “Domestic Dialer” Telephone.
NEXT 26
Activates the Battery Test.
Switches the Battery Charger Off for 5 seconds to test Battery voltage. 3 Beeps at end of Test = Battery OK. One long tone = Battery Voltage Low.
NEXT 27
Answer Call.
Causes the Controller to automatically answer the next incoming call and attempt to establish Upload/Download connection.
This operation will over-ride any other programming option that disables a remote Upload/Download connection.
6. MASTER USER OPERATIONS SUMMARY.
6.1
MASTER USER OPERATIONS
NEXT 33
View and/or Set the Time and Date.
Current Time & Date will be displayed in the sequence: hh:mm:DD:MM:YY:d. (Hours, Minutes, Day, Month, Year, Day-of-week)
1)
Enter the Time data (hh:mm) then
,
2)
Enter the Date data (DD:MM:YY) then
.
3)
Enter the Day of Week (1=Sunday - 7=Saturday) then
.
NEXT 4xx
User Programming. Refer to the following pages for details.
Refer to the User’s Manual for more information on these functions.
