Table of contents
3
Installation and programming manual
Table of contents
Copyright ............................................................................ 2
European directive compliance ............................................... 2
Table of contents.................................................................. 3
Chapter 1
Overview............................................................................. 5
1.1
Application and use 5
1.2
Other parts of the system 7
1.3
The SmartLine fire alarm panel models 7
Chapter 2
General information .............................................................. 8
2.1
Supplied documentation 8
2.2
Manual details 8
2.3
Operator qualifications - access levels 8
2.4
Intellectual property rights 8
2.5
Disclaimer 8
2.6
Recommendations 9
2.7
System test 9
2.8
Note to the installer 9
2.9
Technical support 9
2.10
Conventions 9
2.11
Menu paths 10
2.12
CE Mark 10
2.13
Warranty 11
2.14
Safety laws 11
2.15
Replacement and disposal of used devices 12
Chapter 3
Device management ........................................................... 13
3.1
Product handling and storage 13
3.2
Environmental conditions 13
3.3
Unpacking the device 13
Chapter 4
Technical description........................................................... 15
4.1
Control panel 15
4.2
Internal devices 16
4.3
Technical specifications 18
4.4
PCB current draw 18
Chapter 5
User interface .................................................................... 19
5.1
SmartLine panel frontplate 19
5.2
Repeater (add-on panel) 24
Chapter 6
Installation instructions ....................................................... 27
6.1
Mounting the SmartLine/8Z expansion board (accessory item) 27
6.2
Mounting the SmartLAN/485 Ethernet board (accessory item) 28
6.3
Mounting the SmartLetLoose/ONE extinguishant board (accessory item) 29
6.4
Wall mounting 29
6.5
Connecting the lines 30
6.6
Connecting an alarm dialler 34
6.7
Connecting the dialler for fault communications 34
6.8
Connecting the RS485 BUS 35
6.9
Connecting the fault signalling outputs 37
6.10
Connecting the Alarm signalling output 37
6.11
Connecting NAC outputs to the Smart/8Z expansion board 38
6.12
Connecting AUX and AUX-R outputs 38
6.13
Connecting RELAY output 39
6.14
Connecting the Extinguishant module
(optional system enhancement tool) 39
