InGateway Documentation, Release 0.0.1
3.5.5 Firmware Upgrade
You can upgrade the firmware version for the IG902 on the
Firmware Upgrade
page, so that the IG902
can provide new functions or better user experiences. Follow these steps to upgrade the firmware version:
1. Choose
System > Firmware Upgrade
to display the
Firmware Upgrade
page.
2. Click
Select File
to select a firmware file for the IG902.
3. Click
Starting Upgrade
and
OK
to start the firmware upgrade.
4. Wait until the upgrade succeeds, and then click
Reboot
to restart the IG902.
3.5.6 Access Tools
To facilitate IG902 management and configuration, you can configure the IG902 management and access
methods on the
Access Tools
page. Follow these steps to complete the configuration:
• Configure HTTPS
1. Choose
System > Access Tools
to display the
Access Tools
page.
2. Select
Enable HTTPS
and set the parameters. For details about these parameters, see
HTTPS
parameter description
.
3. Click
Submit
to apply the configuration.
• Configure Telnet
1. Choose
System > Access Tools
to display the
Access Tools
page.
2. Select
Enable TELNET
and set the parameters. For details about these parameters, see
Telnet
parameter description
.
3. Click
Submit
to apply the configuration.
• Configure SSH
1. Choose
System > Access Tools
to display the
Access Tools
page.
2. Select
Enable SSH
and set the parameters. For details about these parameters, see
SSH pa-
rameter description
.
3. Click
Submit
to apply the configuration.
The following figure shows the configuration of HTTPS-based management.
78
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
