InGateway Documentation, Release 0.0.1
1.1.8 Appendix
Factory reset
There are two ways to restore the IG902 to factory settings: hardware factory reset and software factory
reset.
• Hardware factory reset
–
Step 1: After the device is powered on and the ERR light is off, press and hold the RESET key;
–
Step 2: When the ERR light is always on, release the RESET key;
–
Step 3: After the ERR light goes out, press and hold the RESET key again, and release the
RESET key when the ERR light flashes; wait for the ERR light to go out, indicating that the
factory reset was successful.
• Software factory reset
Choose System Management > Configuration Management, click the reset button and select OK.
IG902 will complete the factory reset operation by itself.
1.1. InGateway902 Quick Start Manual
21
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
