InGateway Documentation, Release 0.0.1
1. Choose
Network > Network Interfaces > Ethernet
to display the
Ethernet
page and click the
Gigabitethernet 0/1
tab.
2. Select a network type for interface GE 0/1.
3. Select options or enter values for the parameters. For details about these parameters, see
Ethernet
parameter description
.
4. Click
Submit
to complete the configuration of GE 0/1.
5. Choose
Network > Network Interfaces > Ethernet
to display the
Ethernet
page and click the
Gigabitethernet 0/2
tab. (By default, GE 0/2 is a bridge interface. To configure this interface, you
must remove
gigabitethernet 0/2
from the
Bridge
page first.)
6. Select a network type for interface GE 0/2.
7. Select options or enter values for the parameters. For details about these parameters, see
Ethernet
parameter description
.
8. Click
Submit
to complete the configuration of GE 0/2.
The following figure shows the configuration of GE 0/1, with
Network Type
set to
DHCP
.
The following figure shows the configuration of GE 0/1, with
Network Type
set to
Static IP
.
44
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
