InHand InGateway501, User Manual, Page: 58 / 204

InGateway Documentation, Release 0.0.1
• The DHCP server parameters are described as follows:
– Enable DHCP Service: enables or disables the DHCP service. Caution: The DHCP server and
DHCP relay features cannot be enabled at the same time.
– Interface: specifies the interface on which the DHCP service is enabled. You can select Gi-
gabitethernet 0/1, Gigabitethernet 0/2, Bridge 1, or Dot11radio 1. Interfaces Bridge 1 and
Dot11radio 1 are available only on the Wi-Fi-capable IG902.
– Starting Address: specifies the start IP address of the IP address pool for address allocation to
DHCP clients.
– Ending Address: specifies the end IP address of the IP address pool for address allocation to
DHCP clients.
– Lease: specifies the validity period of allocated IP addresses. The DHCP server will reclaim the
expired IP addresses for reallocation. This field cannot be left blank.
• Windows Name Server (WINS): specifies the IP address of the WINS server.
• Static IP Setting: allows you to bind a fixed IP address to a MAC address, as shown in the following
figure.
54 Chapter 1. InGateway Documentation Site Navigation