InGateway Documentation, Release 0.0.1
3.3.2.1.2 DHCP Relay
A DHCP relay (or DHCP relay agent) can process and forward DHCP information between subnets and
physical network segments. You can configure a DHCP relay and view its configuration on the
DHCP
Relay
page. Follow these steps to configure a DHCP relay:
1. Choose
Network > Network Services > DHCP > DHCP Relay
to display the
DHCP Relay
page.
2. Enable the DHCP relay feature. Before this operation, you must disable the DHCP server.
3. Specify the DHCP server addresses and relay interface. For details about these parameters, see
DHCP
relay parameter description
.
4. Click
Submit
to apply the configuration.
The following figure shows the DHCP relay configuration.
The DHCP relay parameters are described as follows:
• Enable DHCP Relay: enables or disables the DHCP relay feature. The DHCP relay and DHCP server
features cannot be enabled at the same time.
• DHCP Server: specifies the IP address of the DHCP server.
1.2. InGateway902 User Manual
55
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
