InGateway Documentation, Release 0.0.1
commands in the imported configuration file are not listed in a valid order, the system cannot
enter the expected state after a reboot.
–
Export Startup Config: allows you to back up the startup configuration on a host. The startup
configuration is the configuration that the IG902 loads after it starts.
–
Export Running Config: allows you to back up the running configuration on a host. The running
configuration is the configuration that the IG902 is running.
–
Restore Factory Configuration: allows you to restore the factory settings of the IG902. This
operation restores all parameters on the IG902 to the default settings. The factory settings are
restored after a reboot of the IG902.
3.5.4 Device Manager
The Device Manager developed by InHand Networks allows you to monitor the status of IG902 gateways,
maintain on-site devices remotely, configure and upgrade a batch of IG902 gateways at the same time
remotely, and perform other management operations to manage IG902 gateways and on-site devices more
conveniently and efficiently. You can connect an IG902 to the Device Manager on the
Device Manager
page to use the functions and services of the platform. Follow these steps to connect to the Device Manager:
1. Choose
System > Device Manager
to display the
Device Manager
page.
2. Select
Enable Device Manager
.
3. Set the parameters. For details about these parameters, see
device manager parameter description.
4. Click
Submit
to apply the configuration.
The following figure shows the configuration that connects the IG902 to the
iot.inhandnetworks.com
(DM)
platform.
76
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
