InGateway Documentation, Release 0.0.1
Parameters of the NAT rule are described as follows:
• Action
–
SNAT: uses the source network address translation feature that translates source IP addresses of
data packets into another IP address. Generally, this feature is used for data packets sent to the
Internet through the router.
–
DNAT: uses the destination network address translation feature that translates destination IP
addresses of data packets into another IP address. Generally, this feature is used for data packets
sent to the private network through the router.
–
1:1NAT: uses one-to-one IP address translation.
• Source Network (available when the action is set to SNAT or DNAT):
–
Inside: translates private IP addresses.
–
Outside: translates public IP addresses.
• Translation Type, which can be:
–
IP to IP
–
IP to INTERFACE
68
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
