InGateway Documentation, Release 0.0.1
SNTP client parameters are described as follows:
• Enable SNTP Clients: enables or disables SNTP clients. If the cellular interface is selected as the
source interface, the SNTP service will not be enabled when the gateway fails to dial up to a network.
• Update Interval: specifies the interval at which the SNTP clients synchronize time with the IG902.
• Source Interface: specifies the interface through which the IG902 sends SNTP packets. The source
interface and source address cannot be used at the same time.
• Source Address: specifies the source address of the SNTP packets sent from the IG902. The source
interface and source address cannot be used at the same time.
• SNTP Servers List
–
Server Address: specifies the domain name or IP address of an SNTP server. You can add a
maximum of 10 servers to the list. If you set multiple SNTP servers, the system polls all the
SNTP servers to find an available one.
–
Port: specifies the SNTP port number used by an SNTP server.
The NTP server parameters are described as follows:
• Enable NTP Server: enables or disables the NTP server feature.
• Update Interval: specifies the time synchronization interval. The NTP protocol uses the multi-stratum
synchronization model. Generally, stratum-n+1 clocks synchronize with a stratum-n clock source. NTP
74
Chapter 1. InGateway Documentation Site Navigation
Summary of Contents for InGateway501
Page 1: ...InGateway Documentation Release 0 0 1 zhangning Aug 24 2020...
Page 2: ......
Page 4: ...ii...
