Ingersoll-Rand Xe-145M, Pocket Manual

Page: 65 / 116

64

Is the inlet filter housing sealing tight on top of the
inlet valve preventing access of dirt and debris?

Is the machine using Ingersoll Rand OEM parts and
coolant?

Ensure 3APT sump pressure and 4APT package
discharge sensors are reading 0 when the machine
is not running.

Are the remote sensor and dryer
set to “ON”. If one
is turned on the other one needs to be set to off.

Is the dryer “ON” for a TAS unit?

If the machine has a dryer, check the inline filter for
obstructions.
Change Coolant Filter
Xe Software Logic for R & RS machines:
This will occur if the compressor has been running
loaded for at least 8 seconds, coolant temperature is
greater than 120°F (48.9°C), and the coolant filter
pressure drop (5CPT - 6CPT) is greater than 25 psi
(1.72 Bar). This condition must exist for 150 seconds
before the warning is issued.
Recommended Checks