Ingersoll-Rand Xe-145M, Pocket Manual

Page: 6 / 116

5
Customer
’s Main Power Supply
The customer is responsible for correctly sizing and
installing the Main Fuse Protection. This is intended to
protect the machine during an overcurrent condition.
These fuses should be time-delay in order to
accommodate the inrush current at machine startup.
For an instant, the inrush current drawn by the machine
can be several times greater than the full-load rating.
*See the
Engineering Data sheets in Sales Library for
fuse and cable size recommendations.
*Main Fuse Protection not shown in Electrical
Schematic.
Important note : Ingersoll Rand (IR) recommends
fuses and cable size in the Engineering Data Sheet to
facilitate the electrical installation of the machine.
IR is not responsible of customer’s power supply,
electrical installation outside the air compressor, nor
size fuses/cable gage for the customer.