Ingersoll-Rand IRN100-200H-2S Operation And Maintenance Manual Download Page 83

Page: 83 / 102

IRN37 - 160K - CC & IRN50 - 200H & IRN75 - 160K - 2S & IRN - 100 - 200H - 2S & R190-225NE

ingersollrandproducts.com

10.0 MAINTENANCE

10.1 MAINTENANCE PROMPTS

The service warning and flashing LED will appear at

intervals, dependant on the service level selected. Refer

to operating instructions.
The customer can only reset the warning for 24 hours by

pressing the “set” button.
IR service engineers will master reset the warning after

completing the service work.

The service warning will return each subsequent 2000

hours.
The machine will be master reset after service work

conducted prior to the 2000 hour interval to prevent false

indication.

111213.14.59

Summary of Contents for IRN100-200H-2S







































































































Search results

Summary of Contents for IRN100-200H-2S

Reviews:

Related manuals for IRN100-200H-2S

Brands by name

Popular brands

Ingersoll-Rand IRN100-200H-2S, Operation And Maintenance Manual

Search results

Summary of Contents for IRN100-200H-2S

Reviews:

Related manuals for IRN100-200H-2S

Brands by name

Popular brands