Ingersoll-Rand IRN100-200H-2S Operation And Maintenance Manual Download Page 12

Page: 12 / 102

IRN37 - 160K - CC & IRN50 - 200H -CC & IRN75 - 160K - 2S & IRN100 - 200H - 2S & R190-225NE

ingersollrandproducts.com

5.0 SAFETY

CAUTION

Incorrect lifting of machine can cause injury or

property damage.

Lift only from base channels

WARNING

High pressure air.

Can cause severe injury or death.

Compressor can operate in a pressurized

shutdown mode.

Relieve pressure before removing filter plugs/caps,

fittings or covers.

NOTICE

Air discharge

CAUTION

Use of incorrect coolant can cause system

contamination.

Use only SSR ULTRA COOLANT

WARNING

Food contaminant.

Can cause severe injury or death.

Use only Ingersoll Rand SSR H-1F food grade coolant.

NOTICE

Lift here

WARNING

Hot surface.

Can cause severe injury.

Do not touch. Allow to cool before servicing.

22061915 Rev. A

39568464 Rev. 03

111213.14.59

Summary of Contents for IRN100-200H-2S







































































































Search results

Summary of Contents for IRN100-200H-2S

Reviews:

Related manuals for IRN100-200H-2S

Brands by name

Popular brands

Ingersoll-Rand IRN100-200H-2S, Operation And Maintenance Manual

Search results

Summary of Contents for IRN100-200H-2S

Reviews:

Related manuals for IRN100-200H-2S

Brands by name

Popular brands