IRN37 - 160K - CC & IRN50 - 200H -CC & IRN75 - 160K - 2S & IRN100 - 200H - 2S & R190-225NE
ingersollrandproducts.com
4
EN
2.0 FOREWORD
Machine models represented in this manual may be
used in various locations worldwide. Machines sold and
shipped into European community countries requires
that the machine display the EC Mark and conform to
various directives. In such cases, the design specification
of this machine has been certified as complying with
EC directives. Any modification to any part is absolutely
prohibited and would result in the CE certification and
marking being rendered invalid.
The contents of this manual are considered to be
proprietary and confidential to
Ingersoll Rand
and
should not be reproduced without the prior written
permission of
Ingersoll Rand
.
Nothing contained in this document is intended to
extend any promise, warranty or representation,
expressed or implied, regarding the
Ingersoll Rand
products described herein. Any such warranties or other
terms and conditions of sale of products shall be in
accordance with the standard terms and conditions of
sale for such products, which are available upon request.
This manual contains instructions and technical data to
cover all routine operation and scheduled maintenance
tasks by operation and maintenance staff.
Major overhauls are outside the scope of this manual
and should be referred to an authorized
Ingersoll Rand service department.
All components, accessories, pipes and connectors added
to the compressed air system should be:
of good quality, procured from a reputable manufac-
turer and, wherever possible, be of a type approved
by
Ingersoll Rand
.
clearly rated for a pressure at least equal to the ma-
chine maximum allowable working pressure.
compatible with the compressor lubricant/coolant.
accompanied with instructions for safe installation,
operation and maintenance.
Ingersoll Rand
reserves the right to make changes and
improvements to products without notice and without
incurring any obligation to make such changes or add
such improvements to products sold previously.
•
•
•
•
Details of approved equipment are available from
Ingersoll
Rand
Service departments.
This machine has been designed and supplied for
use only in the following specified conditions and
applications:
Compression of normal ambient air containing no
known or detectable additional gases, vapors or
particles
Operation within the ambient temperature range
specified in the
GENERAL INFORMATION
section of
this manual.
IF IN DOUBT CONSULT SUPERVISION.
The company accepts no responsibility for errors in
translation of this manual from the original English
version.
The design of this Compressor package and certain
features within it are covered by patents held by
Ingersoll Rand and patents pending.
SSR ULTRA COOLANT is a registered trademark of
Ingersoll Rand
Company USA.
INTELLISYS is a registered trademark of
Ingersoll Rand
Company USA.
HPM™, HYBRID PERMANENT MAGNET™ and HPM
Logo are trade marks registered by MOTEURS LE-ROY-
SOMER
©
COPYRIGHT 2013
Ingersoll Rand COMPANY
•
•
111213.14.59
Summary of Contents for IRN100-200H-2S
Page 101: ...111213 14 59 ...
Page 102: ...ingersollrandproducts com 2013 Ingersoll Rand 111213 14 59 ...
