Ingersoll-Rand HL1000K, Parts, Operation And Maintenance Manual

Page: 37 / 64

37
HOIST VALVE CHEST ASSEMBLY PARTS LIST
ITEM
NO.
DESCRIPTION
OF PART QTY.
TOTAL
PART
NUMBER
ITEM
NO.
DESCRIPTION
OF PART QTY.
TOTAL
PART
NUMBER
3 Housing Gasket 1 ML50K-445 22 Valve Chest Cover Screw 6 MLK-240
--- Valve Chest Assembly 1 MLK-A545B --- Swivel Inlet Assembly 1 MLK-A4
6 Valve Chest 1 MLK-545A 23 Inlet Body 1 MLK-166
7 Up Valve Assembly 1 MLK-K102U 24 Inlet Stud 1 MLK-B4
•
7A Up Valve Seal 1 MLK-211
•
24A Swivel Inlet Seal 2 R4-210
8 Down Valve Assembly 1 MLK-K1102D
•
24B Swivel Inlet Gasket 1 R18LF-21
•
8A Down Valve Seal 1 MLK-211 24C Inlet Strainer 1 MLK-82
9 Valve Spring 2 MLK-942A
•
25 Valve Chest Gasket 1 Set MLK-928-80
10 Valve Seat Assembly 2 MLK-K615 26 Valve Chest Screw 1 518-104
•
10A Valve Seat Seal 2 C321-606 27 Valve Chest Screw 2 R0H-354-4
•
10B Valve Seat Shaft Seal 1 R000BR-210 28 Valve Chest Plate 1 HLK-549
11 Valve Seat Lock Screw 2 AF160-305
•
29 Throttle Lever Bearing 1 R38M-603
•
12 Valve Seat Retainer 2 MLK-218 30 Valve Chest Plate Screw 5 5080-638-4
13 Piston Spring 2 MLK-250A 31 Muffler 2 MLK-175
14 Piston Assembly 2 MLK-K246A 32 Throttle Shaft 1 MHLK-255
•
14A Piston Seal 1 HLK-103
33
Limit Actuator
1
MLK-251
15 Piston Shaft Assembly 2 MLK-K655A (Old Style Hoists) *
•
15A Piston Shaft Seal 1 R0BR1C-283 Limit Actuator
MLK-251A
•
15B Piston Retaining Pin 1 510-669A (New Style Hoist) *
•
15C ‘O’ Ring 1 R2F-167 34 Limit Actuator Retaining Pin 1 WF171-15
16 Gasket 1 MLK-117A 96 Plug, Pipe (Pull Chain) ** 1 R0H-377
17 Pin 2 MLK-241
97 Plug, Vent (Pull Chain) ** 2 P250-546
18 Cover Assembly 1 MLK-A238A 153 Ingersoll-Rand Logo 1 HRA20A-201
•
18A Valve Chest Cover Seal 2 R000BR-210 181 Fitting, Elbow (Pendant) ** 1 UWD-161
19 Bleed Adjustment Screw 2 MLK-370 182 Fitting, Nipple (Pendant) ** 2 MLK-165
20 Muffler 2 MLK-236 183 Link 2 MLK-224
21 Adjustment Screw Locknut 2 Q1-121
Repair and Conversion Kits
- - -
Valve Chest Repair Kit
For New Style Hoist* only.
1 MLK-VCK1
Includes items 7A, 8A, 9, 10A, 10B, 12, 13, 14A, 15A, 15B, 16,
17, 18A, 24A, 24B, 24C, 25 and 183.
- - -
Overhaul Gasket Kit for all
HLK Hoists (numbers in
paranthesis are for Old Style
Hoist valve chest parts)
1 HLK-K445
Includes items 3, 7A, 8A, 10A, 10B, 12, 14A, 15A, 15B, 18A
(335), 24A, 24B, 25, 34, 36, 39, ‘O’ ring for 49, 51, 53, 63B, 64,
65, 66, 75, 76, 77, 84, 85, 105, 109, 114, 119, 130, 138, 144, 162,
164, 180, 183 and (331).
•
Recommended Spare
* New Style Hoist refererences apply to hoists with second letter of the serial number other than A through G or with second
and third letters other than HA, HB, or HC.
Old Style Hoist refererences apply to hoists with second letter of the serial number A through G or with second and third
letters HA, HB, or HC.
** Pull Chain Conversion Kit (MLK-K415) provides items 94 through 98 to convert hoist to pull chain operation. Items 33, 181,
182 and attached pendant (including control hoses) are replaced by this conversion. Order Pull Chain (93) separately. Refer to
Dwg. MHP1065 parts list for detailed information.
Pendant Conversion Kit (MLK-AL269C) includes all components necessary to convert a pull chain throttle hoist to pendant
control operation used on MLK, MLKR, HLK and HLKR hoists. Items 93 through 98 are replaced by this conversion. Length
of pendant hose must be specified when ordering. Pendant length is normally 5 ft (1.5 m) shorter than lift. Refer to Dwg
TPA0882-3 for additional pendant information.