Ingersoll-Rand HL1000K, Parts, Operation And Maintenance Manual

Page: 11 / 64

11
Two Function, Four Lever Pendant
The four lever pendant is designed to provide a single station for
control of hoist and trolley operations.
Refer to Dwg. MHP1008 for pendant lever function and hose to
component connections.
Three Function, Six Lever Pendant
The six lever pendant is designed to provide a single station for
control of the hoist, the trolley and a third related component
(bridge/runway) operation.
Refer to Dwg. MHP1009 for pendant lever function and hose to
component connections.
Pull Chain Control
The pull chain provides the operator with a local hoist operating
station. The following operating directions are as viewed from
the motor end of hoist, facing the pull chains.
1.
To lift a load pull down on the right pull chain.
2. To lower a load pull down on the left pull chain.
3. To throttle lift or lowering speed regulate the distance the
pull chain travels. Pull chain to full travel for maximum
speed; pull chain partially for slower speeds.
4. To stop lift or lowering of load, release the pull chain.
Hoist motor will stop.