Ingersoll-Rand HL1000K, Parts, Operation And Maintenance Manual

Page: 53 / 64

53
PENDANT ASSEMBLY PARTS LIST
ITEM
NO.
DESCRIPTION
OF PART QTY.
TOTAL
PART NO.
ITEM
NO.
DESCRIPTION
OF PART QTY.
TOTAL
PART NO.
--- Pendant Kit* 1 MLK-K269C
175
Strain Relief Cable
(specify length)
1 BWR3A
160 Pendant Assembly ** 1 MLK-A269C
161 Pendant Throttle Valve 2 MLK-K264B
176
Clamping Sleeve
(see note 3)
2 MLK-521
•
162 Valve Seal 2 R000BR1C-283
163 Valve Cap 2 MLK-K266A 177 Clamping Thimble 2 MLK-602
•
164 Valve Spring 2 MLK-51A
•
180 Valve Cap Gasket 2 MLK-504
165 Throttle Lever 2 MLK-273 182 Fitting, Hose 5 MLK-165
166 Throttle Lever Pin 1 DLC-120A
224
Quick Exhaust Valve
Assembly
*** 20417
167 Lockwasher 2 D02-138
168 Strain Relief Support 1 MLK-450
169 Lockwasher 1 pack H54U-352-10
170 Handle Screw 4 HRE20A-68 Parts Not Illustrated
171 Hose (specify length) 3 50923 179 Warning Tag 1 71059612
172 Plug 1 502-95
218
Hose Tie (3 for standard hose;
2 additional each 5 ft hose)
HRE20A-283
173 Barbed Swivel Fitting 6 51029
---
Strain Relief Assembly
(specify length)
1 MLK-LWR3A - - -
Fitting, Elbow
(supply air inlet)
1 UWD-161
Additional Pendants and Components:
Single Motor Pendant with Hose Kit
1
MLK-AL269C
Includes all components necessary to install complete pendant
assembly. Specify hose length in feet (normally 4 ft (1.2 m) shorter
than lift).
Two Motor Pendant HRA-A122C Two motor pendant without hose.
Three Motor Pendant HRA-A132C Three motor pendant without hose.
Two Motor Pendant (with hose) MLK-AL122C Two motor pendant with hose; specify hose length in feet.
Three Motor Pendant (with hose) MLK-AL132C Three motor pendant with hose; specify hose length in feet.
•
Recommended Spare
*
Pendant Kit including items 161 through 173 and 176 through 182.
**
Includes 161 through 172, 180 and 182.
***
Quantity of 2 required when hose length exceeds 20 ft (6 m); quantity of 4 required when hose length exceeds 50 ft
(16 m).
Notes: 1. Refer to Form P6778 for additional information on pendant throttle handle assemblies.
2. On Old Style valve chests (hoists with the second letter of their serial number A through G or with second and third
letters HA, HB, or HC) order (2) MLK-161 adapters. MLK-1671 is a 1/8 NPT to 7/16-20 elbow.
3. A crimping tool (Nicropress® Tool with groove size G) is required to install the clamping sleeves (176).