background image

59

HOIST AND WINCH LIMITED WARRANTY

IMPORTANT NOTICE

WARRANTY

It is our policy to promote safe delivery of all orders.

This shipment has been thoroughly checked, packed
and inspected before leaving our plant and receipt
for it in good condition has been received from the
carrier. Any loss or damage which occurs to this
shipment while enroute is not due to any action or
conduct of the manufacturer.

Visible Loss or Damage
If any of the goods called for on the bill of lading or
express receipt are damaged or the quantity is short,
do not accept them until the freight or express agent
makes an appropriate notation on your freight bill or
express receipt.

Concealed Loss or Damage
When a shipment has been delivered to you in
apparent good condition, but upon opening the crate

or container, loss or damage has taken place while in
transit, notify the carrier’s agent immediately.

Damage Claims
You must file claims for damage with the carrier. It is
the transportation company’s responsibility to
reimburse you for repair or replacement of goods
damaged in shipment. Claims for loss or damage in
shipment must not be deducted from the
Ingersoll-Rand invoice, nor should payment of
Ingersoll-Rand invoice be withheld awaiting
adjustment of such claims as the carrier guarantees safe
delivery.

You may return products damaged in shipment to us
for repair, which services will be for your account and
form your basis for claim against the carrier.

Ingersoll-Rand Company (I-R) warrants to the
original user its Hoists and Winches (Products) to be
free of defects in material and workmanship for a
period of one year from the date of purchase. I-R
will repair, without cost, any Product found to be
defective, including parts and labor charges, or at its
option, will replace such Products or refund the
purchase price less a reasonable allowance for
depreciation, in exchange for the Product. Repairs or
replacements are warranted for the remainder of the
original warranty period.
If any Product proves defective within its original
one year warranty period, it should be returned to
any Authorized Hoist and Winch Service
Distributor, transportation prepaid with proof of
purchase or warranty card.
This warranty does not apply to Products which I-R
has determined to have been misused or abused,
improperly maintained by the user, or where the
malfunction or defect can be attributed to the use of
non-genuine I-R parts.

I-R makes no other warranty, and all implied
warranties including any warranty of
merchantability or fitness for a particular purpose
are limited to the duration of the expressed
warranty period as set forth above. I-R’s maximum
liability is limited to the purchase price of the
Product and in no event shall I-R be liable for any
consequential, indirect, incidental, or special
damages of any nature rising from the sale or use of
the Product, whether based on contract, tort, or
otherwise.

Note: Some states do not allow limitations on
incidental or consequential damages or how long an
implied warranty lasts so that the above limitations
may not apply to you.

This warranty gives you specific legal rights and you
may also have other rights which may vary from state
to state.

Summary of Contents for force5 FA5A-LAK1





























































Reviews: