Infortrend EonStor DS S12S-J2000-G Hardware Manual Download Page 146

Page: 146 / 216

EonStor / EonStor DS S12/S16/S24 Series

Restoring NVRAM data.

To restore previous ID/LUN mapping settings, users



Use the “

Restore NVRAM from Disks

“or “

Restore NVRAM from

Files

” functions in the firmware. ID/LUN mapping will be restored.



Use the LCD panel to restore ID/LUN mapping settings (refer to the

illustration below).

may use the following options:

RAID model No.
Ready

Ent

Import NVRAM

include password?
except password?

Ent

Import NVRAM
in progress

View and Edit
Logical Drives

System
Functions

Mute Beeper

Import NVRAM from
reserve space

Export NVRAM to

reserve space

Controller
Maintenance

Legend

Ent: Press the Enter (Ent) button.

Ent

: Press and hold the Enter (Ent) button for 2 seconds.

---->

Press the up and down arrow to scroll to the menu you are after.

146

Summary of Contents for EonStor DS S12S-J2000-G

























































































































































































































Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands

Infortrend EonStor DS S12S-J2000-G, Hardware Manual

Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands