Infortrend EonStor DS S12S-J2000-G, Hardware Manual

Page: 27 / 216

EonStor / EonStor DS S12/S16/S24 Series
3U-R/Gxxxx models
4U-R/Gxxxx models
Be sure ever y PSU should
have the same mark 3 Y
405 W
Be sure ever y PSU should
have the same mark 3Y
405W
Be s ure ever y PSU should
have the same mark 3Y
405W
C H0 CH1
C H0 CH 1

RAID controllers (1) / (2):
Each RAID controller module contains a
main circuit board and a pre-installed DIMM module. For single
controllers, a
dummy cage
will be placed at the controller
(2)
position.
The host port configurations will vary. For details, see Rear Panel
Components .
WARNING
Do NOT remove the dummy cage for the single-controller model. Doing so will
disrupt the internal airflow.

Power supply unit & cooling module (3):
2U & 3U
: The hot-swappable PSUs provide power to the system. There
is a cooling module within each PSU. Please refer to your
specific system for details shown in the later sections of this
chapter.
27