Infortrend EonStor DS S12S-J2000-G Hardware Manual Download Page 21

Page: 21 / 216

EonStor / EonStor DS S12/S16/S24 Series

Power supply unit with built-in cooling module

2U and 3U series

: Two cooling modules protect the system from overheating, and

two hot-swappable power supply unit (PSU) modules provide constant power to the

system. The modular nature of the system and the easy accessibility to all major

components ensure ease of maintenance.

4U series

: The S24 series cooling modules can be located on both sides of the

controller. Their PSUs have cooling modules built-in as well to aid the main cooling

modules to keep the system ventilated.

Summary of Contents for EonStor DS S12S-J2000-G

























































































































































































































Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands

Infortrend EonStor DS S12S-J2000-G, Hardware Manual

Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands