Infortrend EonStor DS S12S-J2000-G Hardware Manual Download Page 116

Page: 116 / 216

EonStor / EonStor DS S12/S16/S24 Series

116

134

Pow

Before you power on the RAID system, please power on the expansion JBOD

storage systems first if your network configuration has multiple arrays.

To power on the system please follow the procedures below.

1. Turn on the power switches to the “on” position for every PSUs’ power switches,

from left to right.

er On Procedure

NOTE

Make sure all power supply modules’ switches are turned on!

2. Power on the networking devices, e.g. switches.

3. Power on the host computers. The host computers should be the last devices

that are turned on. Please refer to the documentation that came with your host

computers to see their power on procedures.

Summary of Contents for EonStor DS S12S-J2000-G

























































































































































































































Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands

Infortrend EonStor DS S12S-J2000-G, Hardware Manual

Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands