Infortrend EonStor DS S12S-J2000-G Hardware Manual Download Page 122

Page: 122 / 216

EonStor / EonStor DS S12/S16/S24 Series

TCP/IP network, via the Ethernet Management port. The management

t port. For more

session is conducted using the Ethernet managemen

details, see the SANWatch manual in the CD-ROM.

SANWatch’s Notification Manager notifies users or events through email, MSN, etc.

Notification Manager



LEDs

: LED indicators notify users of system status, events, and failures.

LEDs are located on both the front and rear panel of the chassis. For

details, see and subsequent sections.



Audible alarm:

Audible alarm will be triggered in case of system

failures. For details, see

PSU / Cooling Module LEDs

122

Summary of Contents for EonStor DS S12S-J2000-G

























































































































































































































Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands

Infortrend EonStor DS S12S-J2000-G, Hardware Manual

Search results

Summary of Contents for EonStor DS S12S-J2000-G

Reviews:

Related manuals for EonStor DS S12S-J2000-G

Brands by name

Popular brands