EonStor / EonStor DS S12/S16/S24 Series
4. Insert the replacement module. Make
highest position so that the sa
sure the extraction handle
(1)
is held at its
ddle notches on the sides of the handle can snap
e to engage the back-end connectors. Push the handle
downwards to secure the module.
onto the metal anchor pins
(2)
placed along the interior walls of the PSU slot.
Push the PSU into chassis
(3)
, and when you feel the contact resistance, use
slightly more forc
5. Fasten the retention screw.
6. Reconnect the power cord.
7. Power on the PSU module.
155
