IFT-9373CSlider36 Slide Rail Kit
Once Mounted
Once the enclosure has been mounted, you may refer to the Users Manual that
ardware
oling
If you must relocate the enclosure after installation
Cease all input / output transactions, shutdown the system, disconnect all the cables
(please refer to the User Manual for details)
Empty all drive bays (hard hard drive trays) and transport them separately in
safe packaging
Modules came installed within the enclosure need not be removed
When the system is in operation
Module and drive bays must not be empty! They must have a dummy cover / plate in
l airflow!
e
Allow 18~20cm of clearance space at the rear of the enclosure for ventilation
Avoid touching the PCB and gold-finger connections.
came with your system for further instructions on completing the h
installation process. The Users Manual will go on to explain details on installation /
maintenance of hard drives, controllers, optional modules (BBU, CBM, etc.), co
modules, power supplies, cable connections, topology configurations, etc.
Safety Reminders
place to stabilized interna
Should a module fail, leave it in its place until you have the replacement item on-hand
to take its plac
216
