Infortrend EonStor CS, Maintenance Manual

Page: 34 / 133

EonStor CS Installation Guide
page 34 / 133
Installation Guide
1-5 Individual drive status checking
1.
Please go to EonOne’s
Settings > Node > Drive to check the drive status.
CS Drive Status
Status Description
New Drive When there is a drive was newly-scanned and not yet written any data inside.
On-Line Drive is working normally
Used drive
The drive is already a member drive previously in another environment but was
plugged-in to the CS
Formatted Drive has already been written with some data but it is not a member drive
Exiled
A failed drive but rescanned in the CS; if a workable drive was remove and
reinsert, the CS would also recognized it as Exiled
Not ready CS cannot scan the drive or the drive which was inserted is not bundle drive
Bad The drive is failed
Absent The drive is unplugged

Click here to know what action you shoul
d take when you see a “Used drive” or “Formatted”

Click here
to know how to repair the drive when you see a “Bad” or “Exiled” drive.