Infortrend EonStor CS Maintenance Manual Download Page 29

Page: 29 / 133

EonStor CS Installation Guide

page 29 / 133

Installation Guide

message explanation and actions. Please take the recommend action to solve your issue.

Event ID

220A0105

Severity

Error

Category-Module FW - LD

Prefix Parameter LD:# CHANNEL:# ID:#

Message

Logical drive member drive failed

1st Line Message

Old Message

ID:%.1x Logical Drive ALERT: CHL:%.1d ID:%.1d Drive Failure

Cause

Specific member drive of logical drive was failed.

1. User removed the drive.

2. Drive failed.

3. Backplane connection issue.

Action

1. Insert the drive back and rebuild the Logical Drive if needed.

2. Replace the failed drive and engage the logical drive rebuild

operation manually or automatically to recover logical drive.

3. If it still failed after replacing with a new drive, replace

Contact Infortrend if you still cannot solve your issue after you take the corresponding action. Please click

here

know how to contact Infortrend.

Summary of Contents for EonStor CS






































































































































Search results

Summary of Contents for EonStor CS

Reviews:

Related manuals for EonStor CS

Brands by name

Popular brands

Infortrend EonStor CS, Maintenance Manual

Search results

Summary of Contents for EonStor CS

Reviews:

Related manuals for EonStor CS

Brands by name

Popular brands