Infortrend EonStor CS, Maintenance Manual

Page: 54 / 133

EonStor CS Installation Guide
page 54 / 133
Installation Guide
1-8.3 How to replace Memory Module (DIMM)
1. The controller comes with pre-installed DRAM module(s). You can upgrade or replace it when the bundled module
malfunctions. Please contact your reseller when there is some hardware component need to be replaced.
2. To replace the memory module, you need to remove controller that contains the memory module.
3. Look for the DIMM slot in the controller. Please note that when installing memory modules, please insert CH0
DIMM1 and CH3 DIMM1 slots first.
4. Detach the CBM. Push down the clips to release the DRAM module from the DIMM socket, insert the replacement
DIMM carefully into the DIMM socket, with the DIMM
’s notch aligned to the DIMM socket’s notch guide.
5. Reinstall the controller back to the enclosure.