Infortrend EonStor CS Maintenance Manual Download Page 125

Page: 125 / 133

EonStor CS Installation Guide

page 125 / 133

Installation Guide

Scale-up Step

1. Set the Expansion Enclosure ID, the first expansion enclosure ID must be set to 1, the second

expansion enclosure ID must be set to 2, and so on.

Install the new expansion enclosure to the rack

, to make sure that the SAS cable is long enough to

connect between chassis.

Connect the SAS cable



Connect CS onboard SAS IN port to the OUT port on the expansion enclosure.



Connect expansion enclosure (1) SAS IN port to the OUT port on the expansion enclosure (2).

Power on the new expansion enclosure,

and wait for the storage management GUI EonOne to

Expansion Enclosure

ID Turntable

Summary of Contents for EonStor CS






































































































































Search results

Summary of Contents for EonStor CS

Reviews:

Related manuals for EonStor CS

Brands by name

Popular brands

Infortrend EonStor CS, Maintenance Manual

Search results

Summary of Contents for EonStor CS

Reviews:

Related manuals for EonStor CS

Brands by name

Popular brands