Infortrend EonStor CS, Maintenance Manual

Page: 40 / 133

EonStor CS Installation Guide
page 40 / 133
Installation Guide
1-6.3 Management Network:
1.
Go to EonOne’s
Settings > Network > Management , you can set the IP address, subnet mask and Default
gateway for cluster management port in here.
If you see the abnormal status for Internal and Front-End Network, please follow the below instructions.
1. Check if there is any physical connection detach or switch cables, ports or SFP+ to make sure there is no
hardware component become faulty.
2. Check if the frame size has been set identically In EonOne and network switch side. At CS Internal and Front-end
Network, the frame size can be set as 1500 or 9000(jumbo frame), the switch must be set as the corresponding
size as well.