Infortrend EonStor CS, Maintenance Manual

Page: 59 / 133

EonStor CS Installation Guide
page 59 / 133
Installation Guide
1-8.6 How to replace Drives
Please contact your reseller when there is some hardware component need to be replaced.
You may need to identify the faulty hard drive via using drive tray LED or EonOne.
For CS 3016/3024/4016/4024
1. When the faulty hard drive is located, push the release button to eject the drive tray, wait for around 30 seconds
for the drive to spin down and then pull out the tray using the spring handle.
2. Remove the retention screws from the drive tray to dislodge the hard drive.
3. Install the replacement hard drive to the drive tray and insert the assembled hard drive and drive tray to the bay
with the spring handle open. Close the spring handle when the tray is fully inserted to the bay.