EonNAS 3000 Series Hardware Manual
32
2.2.3
Inserting the Drive into the Drive Tray
Remove the hard drive tray from the enclosure by pressing on the release button.
Place the hard drive into the drive tray. Make sure the hard drive is oriented that the
drive’s interface connector is facing the open side of the drive tray and its label side
facing up. Adjust the drive’s location until the mounting holes in the drive canister are
aligned with those on the hard drive. Secure the drive with four (4) supplied 6/32
flathead screws.
Type I Tray
Type II Tray
Without MUX
With Mux
