EonNAS 3000 Series Hardware Manual
52
3.4.2
Replacing / Installing a DRAM Module
1.
Shut down
the NAS server and disconnect both power cords.
2.
Wait for one minute
for the remaining electricity on the main board to disperse.
3.
Remove the controller
from the chassis (please refer to
).
4.
Push the clips
outward
on both sides of the DIMM slots and the DIMM module
will eject automatically.
6.
To install the new module
, match the module polarization notch to the DIMM
notch and applying force evenly on both sides, push the module into the DIMM
socket until the clip latches onto the module.
