EonNAS 3000 Series Hardware Manual
41
next step.
Name
Model
IP Address
NAS_3016
EonNAS 3016
10.0.0.2
NOTE
If no NAS device was found
•
Make sure your PC and NAS are connected to the same switch / router!
•
Turning off the antivirus’ firewall (please refer to its manual) then close the existing
EonOne, start up a new EonOne and start from step 3.
•
Please refer to the setup instructions in the User Manual on the CD.
5. When the “Set IP” button lights up, Click on it and EonOne will automatically
assign an IP address for your NAS. Wait for an IP settings window to appear.
You may be prompted for a password. If so, please enter “admin” and click
OK.
6. Use EonOne to find the NAS system with the matching IP address and click
the connect button.
NOTE
Default addresses / password for Ethernet management port:
Controller A
~ 10.0.0.2 /
Controller B
~ 10.0.0.3
Username: admin Password: admin