EonNAS 3000 Series Hardware Manual
51
To replace or upgrade system memory, please do the following:
1. Click on thisproduct datasheet.
2. From the memory section on the datasheet, locate your system’s default
memory size and upgradeability.
3. Order replacement / upgrade memory module from your vendor.
WARNING
Make sure both controller statuses are “Active”.
Remove
ONLY
one controller to upgrade at a time!
When reinserting the memory-upgraded controller, make sure the controller is
“Active” before your remove the other controller to upgrade!
4.
to gain access to the memory modules.
5. Follow the instructions on “
Replacing / Installing a DRAM Module
” and install
memory module(s) into the desired slot(s) to complete the upgrade/ replacement
process. Please refer to the above table for default/ upgrade memory slots.
